ML8511 UV紫外线传感器 V1.0

概述

该模块采用了通用的ML8511 UV传感器原件,可以用来检测室内或室外的紫外线密度。通过将光电流转化成电压的原理来检测UV强度,同时非常适合被被外部电路所采用。该模块还具备省电模式可达0.1uA,适合在智能可穿戴和手机等设备上使用。

应用

技术规格

连接示意图

颜色 名称 功能描述
蓝色 A0 模拟信号输入引脚
黑色 GND 电源负
红色 VCC DC 5V

紫外线传感器管脚定义

ML8511 UV等级图表

ML8511 UV等级图表

从图表上可以看到紫外线输出电压映射到等级是一条直线,从1.0V开始,最大是2.8V(15mW/cm2)。Arduino虽然有一个内置的函数map() function,但是map()是不能工作在浮点型的。这里要感谢Arduino社区开源奉献者才有了下面的一个简单的mapfloat()函数,方便我们使用。

//The Arduino Map function but for floats
//From: https://forum.arduino.cc/index.php?topic=3922.0
float mapfloat(float x, float in_min, float in_max, float out_min, float out_max)
{
  return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
}

下面是将传感器读到的电压值转换成mW/cm2等级:

float uvIntensity = mapfloat(outputVoltage, 0.99, 2.8, 0.0, 15.0); //Convert the voltage to a UV intensity level

示例代码

    /***************************************************
     * UV Sensor v1.0-ML8511
     * <....>
     ***************************************************
     * This example reads UV intensity from UV Sensor v1.0-ML8511.
     *
     * Created 2014-9-23
     * By Phoebe <phoebe.wang@dfrobot.com>
     * Modified 2014-9-23
     * By Phoebe phoebe.wang@dfrobot.com>
     *
     * GNU Lesser General Public License.
     * See <https://www.gnu.org/licenses/> for details.
     * All above must be included in any redistribution
     ****************************************************/

    /***********Notice and Trouble shooting***************
     * 1.Connect ML8511 UV Sensor to Arduino A0
       <https://wiki.dfrobot.com.cn/index.php/%E6%96%87%E4%BB%B6:SEN0175_Diagram.png>
     * 2.This code is tested on Arduino Uno, Leonardo, Mega boards.
     ****************************************************/


    int ReadUVintensityPin = A0; //Output from the sensor

    void setup()
    {
      pinMode(ReadUVintensityPin, INPUT);
      Serial.begin(9600); //open serial port, set the baud rate to 9600 bps
      Serial.println("Starting up...");
    }

    void loop()
    {
      int uvLevel = averageAnalogRead(ReadUVintensityPin);

      float outputVoltage = 5.0 * uvLevel/1024;
      float uvIntensity = mapfloat(outputVoltage, 0.99, 2.9, 0.0, 15.0);

      Serial.print("UVAnalogOutput: ");
      Serial.print(uvLevel);

      Serial.print(" OutputVoltage: ");
      Serial.print(outputVoltage);

      Serial.print(" UV Intensity: ");
      Serial.print(uvIntensity);
      Serial.print(" mW/cm^2");

      Serial.println();
      delay(100);
    }

    //Takes an average of readings on a given pin
    //Returns the average
    int averageAnalogRead(int pinToRead)
    {
      byte numberOfReadings = 8;
      unsigned int runningValue = 0;

      for(int x = 0 ; x < numberOfReadings ; x++)
        runningValue += analogRead(pinToRead);
      runningValue /= numberOfReadings;

      return(runningValue);

    }

    //The Arduino Map function but for floats
    //From: https://forum.arduino.cc/index.php?topic=3922.0
    float mapfloat(float x, float in_min, float in_max, float out_min, float out_max)
    {
      return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
    }

你可以用一个紫外LED灯或者在阳光下测试你的传感器,赶紧来测试看看你的周围的紫外线等级吧~

DFshopping_car1.png 购买 UV Sensor V1.0-ML8511紫外线传感器